User talk:WindPower/Wind's config

From Team Fortress Wiki
< User talk:WindPower
Revision as of 19:26, 17 December 2011 by WindPower (talk | contribs) (Disguise Kit)
Jump to: navigation, search

Trouble with other Configs and such

Hey Wind, i just started using Aron's Crosshair Switcher and i can't seem to get the two of these working together, What should i do? - Yack RED Le Party Phantom.png 09:30, 9 April 2011 (UTC)

Feature requests

Poot feature requests heer! — WindPower 21:22, 6 July 2010 (UTC)

OK scout dodge on mouse3 jump and strafe left, jump and strafe right stop on release ?--Markd 15:21, 8 July 2010 (UTC)
But scout's mouse3 is already taken by the forcejump D: However, I have an idea that might be better... How about holding Shift while W/A/S/D'ing makes you run and jump at the same time in those directions? So you'd jump automatically as you move around.
i was wanting to avoid the switching from a to d with a fully scripted Z shaped jump pattern on approach (common tactic but i keep fogetting and go WM1 lol)) unsure, nice scripts btw --Markd 13:56, 9 July 2010 (UTC)
How about Shift+Space causes Scout to perform a zigzag jump using the Wait command and whatever fancy stuff makes the Panic Mode switch directions? Just a suggestion. DarkPyro 08:54, 23 November 2011 (PST)
This would probably break on servers that don't allow the wait command. This config doesn't use any command using "wait", with the exception of the spy backstab because it is still useful on servers without the wait command enabled — Wind 17:24, 23 November 2011 (PST)

Engineer Update stuff.

How? How did you do it? :O And what does it do? EXPLAIN! I believe crazy mofo applies again. -- Smashman... (ts) 16:13, 8 July 2010 (UTC)

How did I do what now? o.O I just added a note in case the engi update breaks this script, if they change the weapon slots around and all. — WindPower 16:38, 8 July 2010 (UTC)
I Can't seem to build teleporter exits using the config key (4), it just builds another sentry, destroying the one from key 1. And shift+4 doesn't bring up the Build PDA, it brings up a quite buggy Wrangler (equipped) until I release one of the buttons. Help please! Oh, and please reply to my userpage as well, it emails me. Dark Pyro 08:29, 12 June 2011 (UTC)
It works for me D: What options have you selected for the engineer, and have you modified anything else? Does it work with a clean install of the config, no preferences set? — Wind 18:31, 12 June 2011 (UTC)
Yeah, sorry, my watchlist was kinda big, I've just cleaned. It does work, but only on some servers. I don't have a way to edit .cfg files, so nothing was modified. I think premium servers (some, at least, the 2 that I've been on) do something to the config files. Anyway, a clean install and avoiding Premium servers seem to works. Dark Pyro 16:12, 13 June 2011 (UTC)
You can just edit them with any text editor :3 — Wind 00:35, 14 June 2011 (UTC)

Medic

A player in our clan has added the following to thier medic script Code:alias "autocall_initial" "hud_medicautocallersthreshold "90"" alias "autocall_temp" "hud_medicautocallersthreshold "150"" alias "+autocall_temp_hit" "autocall_temp" alias "-autocall_temp_hit" "autocall_initial"

alias "forwardspawn_random" "join_class "random"; alias "forwardspawn_toggle" "forwardspawn_medic"" alias "forwardspawn_medic" "join_class "medic"; alias "forwardspawn_toggle" "forwardspawn_random";say_team "**RELOCATED**"" alias "forwardspawn_toggle" "forwardspawn_random"

bind "f1" "forwardspawn_toggle" bind "f2" "+autocall_temp_hit"

echo "*** Daytism Medic Script a1.0 Loaded :-D***" Features: - "Move Spawn Button", default button is F1 (requires a double tap). Moves spawn by selecting a random class (first press of F1) and then rejoins the Medic class (second press of F1). - "Shows Nearby Teammates", default button is F2. I got this idea from another script I saw on the internet, it is quite the interesting feature imo. Although two things: It only displays teammates NEARBY (range is roughly half the 2fort bridge) and if you press the button you need to press it again to turn it "off" even if it appears off. xD http://www.tf2nubs.co.uk/index.php?topic=3337.new#new

they look like good medic additions ??--Markd 09:16, 19 July 2010 (UTC)

Uber Update

Some of the weapons will not work due to issues with kkeybinds, such as the Detonator (M2 as pyro automatically changes to Flamethrower and then performs an Airblast). Could you find these problems, fix them and release the new versions? Thanks! Dark Pyro 22:06, 23 June 2011 (PDT)

Could you list them? I'm sure I'd miss some if I just went by head~ — Wind 11:54, 25 June 2011 (PDT)
I can't remember them all either... I remember Pyro at the very least. (Detonator needs M2, secondary slot). Um... Check the new weapon lists for more. Also- new feature ideas: Pressing M2 as Medic automatically swaps to Medigun and activates uber with one click. Scout has a real triple jump now... Possible script for best timing, giving the highest jump? EDIT:I doubt that there is more than the Detonator... Dark Pyro 07:46, 28 June 2011 (PDT)
Pictogram tick.png DoneWind 13:55, 1 July 2011 (PDT)

Viewmodel Preferences?

Could you add a preference where you can choose to have View-models on/off on particular weapons? Like, I want to have View-models off when I'm using my Revolver as spy, but back on when I swap to my knife. Or could you tell me what I should add to achieve this? – Yack (talk) 08:02, 8 July 2011 (PDT)

That would require all classes to use the weaponsys_ stuff. Then, add r_drawviewmodel 0/1 to the hook aliases it provides. Not easy and you're exposing yourself to weaponsys's inherent and unavoidable bugs, but that's the only possible way — Wind 20:47, 8 July 2011 (PDT)

Preferences

Looking at the preferences and settings, I noticed a lack of options for Soldier, namely the choice to switch Secondary Fire and Rocket Jump between Mouse2 and Mouse3, as I personally prefer to have the Rocket Jump command on Mouse2 as I use this more than Secondary Fire and I find it more comfortable. If anyone else has any preferences they want changed, you can add them here to save a new topic. Thanks! Dark Pyro 07:06, 2 October 2011 (PDT)

Pictogram tick.png Implemented :3 — Wind 22:23, 2 October 2011 (PDT)

Useable Items shortcut key

Simply put, there isn't one. So, some items such as the Schadenfruede and Noise Makers don't work, as well as the High-5 taunt and more. It would help if there was one there. Possibly on the Insert key? It was there before, you added it earlier, but it's gone now. If/when you do this, could you make sure that the Config page is up to date too? Some of the info on there is old (eg, Soldier's M2, Pyro's M2, etc)

Also, why are so many of these posts from me?

Thanks yet again, DarkPyro 15:27, 15 October 2011 (PDT)

Valve changed the command name. Pictogram tick.png FixedWind 19:37, 15 October 2011 (PDT)

Disguise Kit

Under the current config settings, there is no way to make the Disguise Kit the active weapon. Could you add a short piece of code to Spy's CFG to make Alt-4 equip the Kit, as Alt-1, Alt-2 and Alt-3 equip the Revolver, Sapper and Knife respectively? This minor oversight prevents the "For Your Eyes Only" achievement (And "Need A Light?" for Pyro).

Me again!

DarkPyro 08:46, 23 November 2011 (PST)

This is possible, but the Spy's button system is very intricate due to having preferences for weapon lock and preferences for disguise kit on number buttons. As a result, adding yet another thing on top of those buttons would be very complex, and it probably wouldn't always work either. So instead, I added it to Alt+B, since "B" does disguise-related things. However, my copy of TF2 says I need to download 4 GB in order to play, which I simply can't afford on my Internet plan, so I can't test it. Can you test it for me? Here are the modified files. — Wind 18:05, 23 November 2011 (PST)
Looks good, works fine... and nice, easy keys. Thanks once more... DarkPyro 12:04, 5 December 2011 (PST)
Pictogram tick.png PootedWind 13:58, 8 December 2011 (PST)
No, wait, the Pref-Weaponlock is missing the "_12" from the end, in the Spy CFG... it doesn't work until you edit the files. Just noticed in the latest public version. Sorry about that. DarkPyro 07:20, 17 December 2011 (PST)
What do you mean, which file and line exactly? — Wind 11:26, 17 December 2011 (PST)