Difference between revisions of "Scripting"
CodingIsFun (talk | contribs) m (→Advanced Launch Options: feel free to remove non-tf2 launch options) |
Mr.Panface (talk | contribs) (Added a section for "Timed Actions", cleaned up a few spots of awkward grammar / text) |
||
Line 752: | Line 752: | ||
=== Randomization === | === Randomization === | ||
− | Randomization is a strange and niche feature. Randomization is rarely used, as most processes aren't as useful when randomized. However, randomization can be useful for | + | Randomization is a strange and niche feature. Randomization is rarely used, as most processes aren't as useful when randomized. However, randomization can be useful for chat binds, such as for trade advertising or annoying other players on the server. |
'''Note: Due to the nature of TF2's scripting, this section will be considerably long. If you don't already have an understanding of how cycles work, the information presented may not be relevant.''' | '''Note: Due to the nature of TF2's scripting, this section will be considerably long. If you don't already have an understanding of how cycles work, the information presented may not be relevant.''' | ||
Line 787: | Line 787: | ||
</pre> | </pre> | ||
This script is assigning and resigning multiple alias values. When any of the {{key|WASD}} keys are pressed, the cycle command is ran, which moves the cycle command to the next value in the cycle and sets the "call" command to a value corresponding to the cycle number. This is based on the player's movement, and only changes values if the player is moving. It is possible to make this randomizer more effective by using other various techniques stated here (ex. Loops), but this example is for demonstration purposes only. | This script is assigning and resigning multiple alias values. When any of the {{key|WASD}} keys are pressed, the cycle command is ran, which moves the cycle command to the next value in the cycle and sets the "call" command to a value corresponding to the cycle number. This is based on the player's movement, and only changes values if the player is moving. It is possible to make this randomizer more effective by using other various techniques stated here (ex. Loops), but this example is for demonstration purposes only. | ||
+ | |||
+ | === Timed action === | ||
+ | Timed or held actions trigger when a button is pressed down for a certain amount of time. Timed actions can be used in situations where a script or command shouldn't be instantly ran the moment a button is pressed (ex. fat-fingering a disconnect bind) | ||
+ | |||
+ | <pre> | ||
+ | alias "+ti_zoom" "alias zoom_con zoomOn; wait 132; zoom_con" | ||
+ | alias "-ti_zoom" "zoomOff; alias zoom_con ; rb_tizoom-M4" | ||
+ | alias "rb_tizoom-M4" "unbind mouse4; wait 132; bind mouse4 +ti_zoom" | ||
+ | alias "zoomOn" "fov_desired 20; r_drawviewmodel 0" | ||
+ | alias "zoomOff" "fov_desired 90; r_drawviewmodel 1" | ||
+ | bind "mouse4" "+ti_zoom" | ||
+ | </pre> | ||
+ | |||
+ | Pressing (and immediately releasing) {{key|Mouse 4}} with this script loaded will have no noticeable effect, however holding down {{key|Mouse 4}} for 2 seconds will cause the script to lower the FOV to 20, and hide viewmodels. Letting go of {{key|Mouse 4}} at any point will undo these changes by setting the FOV to 90 and unhiding viewmodels.<br><br> | ||
+ | This works because of the use of + and - aliases. Pressing whatever key <code>+ti_zoom</code> is bound to will redefine <code>zoom_con</code> to activate the script, and if left pressed for the <code>wait</code> duration will execute the script. But, if the button is released <code>zoom_con</code> is redefined to do nothing. The key is then "disabled" by being unbound for the same <code>wait</code> duration, and rebound afterwards to restore use of the key.<br><br> | ||
+ | '''Note:''' Rebinding of the key is technically redundant, as the script will not execute the timed action if the button is unpressed. However, if the button is pressed multiple times it is possible to execute the timed action if the confirmation alias (in this case, <code>zoom_con</code> is properly defined as any of the presses would execute it. Unbinding the key for the same duraiton of the original <code>wait</code> delay ensures that the effect can't be triggered if the button is rapidly used | ||
== Commenting == | == Commenting == |
Revision as of 00:28, 31 August 2021
“ | This thing ain't on auto-pilot, son!
Click to listen
— The Engineer after using his sentry jump script
|
” |
Scripting is the use of configuration files (.cfg
) mainly to create new keybinds and aliases, automating complex behaviors and console command sequences. Unlike hacking, scripting is built into Team Fortress 2 and is not banned by VAC (Valve Anti-Cheat). Uses of scripting vary from simply binding a key to a command to self-referential loops and nested aliases that redefine one another. Any functionality that can be created with scripting can also be accomplished without it, but scripting allows these functionalities to be used in the heat of battle.
Contents
- 1 Scripting Commands
- 2 Class-specific CFG Files
- 3 Launch Options
- 4 Set Launch Options
- 5 Common Launch Options
- 6 Launch Options to Adjust Detail Levels and Graphic Rendering
- 7 Advanced Launch Options
- 8 List of key names
- 9 Useful commands
- 10 Advanced Scripting Techniques
- 11 Commenting
- 12 Noteworthy scripts
- 12.1 Patched scripts
- 12.2 Current Scripts
- 12.2.1 Weapon Viewmodel Hiding Scripts
- 12.2.2 Weapon Zoom Scripts
- 12.2.3 Sentry Jumping Scripts
- 12.2.4 Gunslinger Scripts
- 12.2.5 Sensitivity and Control scripts
- 12.2.6 Charge Dash Scripts
- 12.2.7 Quickscope Scripts
- 12.2.8 Rocket Jump Scripts
- 12.2.9 Auto-Disguise Scripts
- 12.2.10 ÜberCharge Broadcasting Scripts
- 12.2.11 Medic Radar
- 12.2.12 Kill-Bind Scripts
- 12.2.13 Null-Cancelling Movement Scripts
- 12.2.14 Chat Bind Scripts
- 13 Notes
- 14 See also
- 15 References
- 16 External links
Scripting Commands
The following is a list of commands which have no use apart from scripting; they do not influence gameplay directly.
Bind
The simplest command is the bind command. It will cause a certain key to execute a certain action, whether that action is a setting, a command, or a script.
bind [KEY] [COMMAND]
Quotes can be optionally placed around the key and/or the command. However, the commands will need to have quotes when it has spaces in between the values and the command, so that the console can interpret it as one command. An example would be bind mouse1 "say texthere", where quotes are needed around "say texthere" because of the space between the two phrases.
bind [KEY] "[COMMAND 1];[COMMAND 2];[COMMAND 3]"
Quotes can be optionally placed around the key, but must be present around the commands, as the console will not interpret consecutive commands if quotes are not present.
Note: The command
say "Example Text"
is correct, but
bind <KEY> "say "Example Text""
is not. This is because the quotes are misinterpreted, and quotes inside of quotes are unnecessary due to commands automatically stopping at every semicolon.
Binds come in two forms:
bind e "voicemenu 0 0"
This bind will make the player call for a Medic when they press E.
bind w +forward
This bind will make the player move forward while they have W held down.
Toggle
This command allows a setting to be toggled between two or more values.
toggle sv_cheats 0 1
Bindtoggle
This works identically to toggle, but binds it to a key.
bindtoggle o sv_cheats 0 1
- Note: If no value is specified, toggle and bindtoggle default to switching between 0 and 1.
For both Toggle and Bind Toggle, ensure that the values given are outside the inverted commas. ("example" 0 1)
Incrementvar
This allows for variables to be increased or decreased repeatedly by a set amount.
bind MWHEELUP "incrementvar fov_desired 75 90 1" bind MWHEELDOWN "incrementvar fov_desired 75 90 -1"
This will cause the field of view to increase when scrolling up, and to decrease when scrolling down
- Note: Incrementvar will cause the value to wrap around if it gets too large or too small. In this example, once the field of view hits 90, it will drop down to 75, and vice-versa.
Alias
An alias allows multiple commands to be referenced by a single command. This is effectively shorthand, and it is most useful when a series of commands need to be called multiple times.
- Note: Alias names cannot contain spaces. They may contain underscores, numbers, and symbols. Alias names are case-sensitive.
alias Call_For_Medic "Voicemenu 0 0" bind "e" "Call_For_Medic"
This script functions the same with a simple bind, meaning that when the player presses E, they will call for a Medic.
- Note: An alias can have a + symbol in front of it (e.g. +Diagonal), it will execute the - version afterwards (e.g. -Diagonal). This can be useful for movement binds.
alias "+Diagonal" "+moveleft; +back" alias "-Diagonal" "-moveleft; -back" bind "z" "+Diagonal"
This script allows the player to move diagonally. Here, pressing Z will cause the player to move diagonally backward and left.
- Warning: The following code will not work!
bind "z" "+moveleft; +back"
Although pressing Z will cause the player to move backward and left, the game engine does not invert the +back command due to it being a second command, and releasing Z will not cause the player to stop backing up.
Exec
This command will execute another file. This means that complex scripts can be stored in other files, so as not to clutter up more general files.
exec autoexec.cfg
This script will execute the player's autoexec script.
Echo
This command will cause text to be printed to the console. This is very useful for debugging.
echo Scripting is; echo very useful
This will print out Scripting is
and very useful
on two separate lines. This is because a newline is added to the end of any text passed to echo
. Spaces are only parsed if they are between words, or if the echoed text is between quotes, as in the next example:
echo " Scripting is very useful. "
The extra spaces will be printed out, since the string is delimited by quotation marks.
- Note: It is not possible to print out the " character, as its meaning will be misinterpreted. However, you can print single quotes: that is, the ' character.
- Note: Echo occasionally will misprint strings that are not delimited by quotation marks. As a general rule of thumb, it is better to enclose what you wish to print within quotation marks. It also makes it easier to read for humans.
Wait
This command will make the game wait a given number of frames before executing the next command.
- Note: The amount of real time this corresponds to depends on the server's tickrate.
- Warning: Wait commands are disabled on certain servers. This will cause certain scripts to fail, and may (in semi-rare cases) cause the game to crash. See Wait Testing for help to protect against this.
echo Why did the chicken cross the road?;wait 66;echo To get to the other side!
This script will wait 66 ticks (1 second on most servers) before printing the punchline.
Class-specific CFG Files
When switching to a certain class, the game executes the corresponding CFG file (if it exists), named after the given class.
scout.cfg soldier.cfg pyro.cfg demoman.cfg heavy.cfg engineer.cfg medic.cfg sniper.cfg spy.cfg
This automation lets the player have different keybinds and game settings for each class.
Launch Options
In order to improve or otherwise change your gameplay experience, the following launch options can be used. To use them, right-click on Team Fortress 2 in the Steam Library and select "Properties". Then, select "Set Launch Options" and insert your desired commands (note that all launch options contain a "-" before the command, remember to include it):
Set Launch Options
- Right-click on the game title under the Library in Steam and select Properties.
- Under the General tab click the Set launch options... button.
- Enter the launch options you wish to apply (be sure to separate each code with a space) and click OK.
- Close the game's Properties window and launch the game.
Common Launch Options
- -autoconfig - Restores video and performance settings to default for the current hardware detected. Ignores settings inside any .cfg files until this parameter is removed.
- -dxlevel <level> - Forces a specific DirectX version when launching the game. This is useful if your graphics hardware is older, and gets significantly better performance in an earlier version of DirectX. Below are the most common modes used:
- -dxlevel 80
- -dxlevel 81
- -dxlevel 90
- -dxlevel 95
- -fullscreen - Forces the engine to start in fullscreen mode.
- -windowed or -sw - Forces the engine to start in windowed mode.
- -w <width> - Forces the engine to start with resolution set to <width>.
- -h <height> - Forces the engine to start with resolution set to <height>. This launch option does not need to be set in the presence of -w. The width value will determine the height automatically.
- -refresh <rate> - Force a specific refresh rate.
- -novid or -novideo - When loading the game with this parameter, the intro Valve video will not play.
- -sillygibs Enables low violence.
Launch Options to Adjust Detail Levels and Graphic Rendering
- +r_rootlod # - Adjusts Model Detail where # is 0 for high, 1 is medium, and 2 for low
- +mat_picmip # - Adjusts Texture Detail where # is 0 for high, 1 is medium, and 2 for low
- +mat_reducefillrate # - Adjusts Shader Detail where # is 0 for high and 1 for low
- +r_waterforceexpensive # - Adjusts Water Detail where # is 0 for low and 1 for high
- +r_waterforcereflectentities # - Adjusts Water Reflectiveness where # is 0 for low and 1 for high
- +r_shadowrendertotexture # - Adjusts Shadow Detail where # is 0 for low and 1 for high
- +mat_colorcorrection # - Adjusts Color Correction where # is 0 for low and 1 for high
- Filtering Modes:
- +mat_trilinear 0 - Use Bilinear Mode (least system-intensive)
- +mat_trilinear 1 - Use Trilinear Mode (more system-intensive)
- +mat_forceaniso # - Use Trilinear Mode (where # is 2, 4, 8, or 16 - higher levels of filtering require more system resources)
- +mat_hdr_level # - Adjusts High Dynamic Range lighting effects where # is 0 for "off" (requires least resources) and 2 for "full"
Advanced Launch Options
- -all_languages - Loads all language files
- -autoconfig - Restores video and performance settings to default for the current hardware detected. Ignores settings inside any .cfg files until this parameter is removed
- -32bit - Forces the engine to start in 32-bit mode. Only useful on 64-bit Operating Systems.
- -adapter - Sets the GL graphics adapter. Default is 0.
- -allowdebug - Fakes a debugger for phonehome, and is the same as -dev, unless -nodev is specified.
- -allowstalezip - Suppresses console warnings from stale.txt existing.
- -basedir - Sets the base directory for the game files. On Xbox 360 RFS, this is forced to smb://hostname/game.
- -bi - Defines the build identifier ID which is used in phonehome
- -bugbait - This lets IsLoadingBugBaitReport return true.
- -bugreporterdll - Name of the bug reporter DLL to use
- -buildcubemaps - Builds cubemaps when fully loaded into a map, then quits the game.
- -ccsyntax - Spew details about the localized strings we load.
- -clientport - Sets the client port. Default is 27002.
- -collate - Skips everything, just merges the reslist from temp folders to the final folder again.
- -conclearlog - Clears the console.log text file on start. Only works if -condebug set.
- -condebug - Logs all console output into the console.log text file.
- -console - Starts the game with the developer console enabled. Same as having con_enable enabled.
- -deathsonly - Supposed to only count deaths while parsing tf2 gamestats, but actually pointless because there is only code for deaths.
- -defaultgamedir - Fallback directory if "-game" is not set. Default is "hl2".
- -dev - Enables developer mode. Also disables the automatic loading of menu background maps and stops the quit dialog from appearing on exit.
- -debugdxsupport - Writes debug DirectX information as keyvalues to the console as shader devices are loading configuration.
- -disallowhwmorph - Same as mat_disablehwmorph 1. Disables HW morphing for particular mods.
- -dti - Prints the datatable when being sent
- -dumpvidmemstats - Spews video memory statistics to vidmemstats.txt. This forces CModelLoader to quit.
- -dvd - Enables strict DVD mode. Allows loading files from DVD only. Xbox 360 only.
- -dvddev - Enables developer DVD mode. Allows loading files from a remote path as a fallback as well as the DVD. Xbox 360 only.
- -dxlevel <level> - Forces the game to start using specified DirectX API version. Officially supported values are: 60, 70, 80, 81, 90, 91, 95 (recommended), 98 (Xbox 360 only), and 100. After starting the game with this launch parameter, the selected value will be saved for future start ups and video settings will be temporarily reset (but not saved), so it is highly recommended to remove this launch parameter after first launch with it. See mat_dxlevel.
- -edit - According to comments, intended to replace -tools. Does nothing except disable all file logging for building reslists.
- -endgamevid - If specified startup videos will not be skipped, and EndGameVids.txt will be used instead of StartupVids.txt. This can also be invoked by the command "startupmenu playendgamevid", which bails back to the menu and plays the end game video.
- -exit - Quits the game after fully loading into a map.
- -filmgrain - Enables the filmgrain screen space effect.
- -flushlog - Causes log files to be flushed to disk once per second (rather than after every 4kbytes of log data).
- -floathdr - Forces HDR to use float values.
- -forcenovsync - Forces vsync to be disabled.
- -forcestartupmenu - Forces the background menu map to always load, even if developer mode is active or the game is loading straight to a level.
- -forcexboxreconfig - Forces default config settings to be loaded on Xbox 360.
- -forever - When you get to the end of the maplist, start over from the top
- -fs_log - Starts creating a batch file to copy files at the specified filename. This works on the latest engine branch.
- -fs_logbins - Logs binaries to the batch file from -fs_log.
- -fs_nopreloaddata - Loads in the precompiled keyvalues data for each type. Works only with dedicated servers.
- -fs_target - Sets the target game directory to copy files to, used with -fs_log.
- -full_memory_dumps -
- -fullscreen or -full - Forces the engine to start in fullscreen mode.
- -g15 - Enables Logitech G15 support. G15 is only supported in SiN Episodes: Emergence. [confirm]
- -game - Sets game or mod directory to load the game from. Usually is set by default if not user specified. Default is "-defaultgamedir"'s setting. If -defaultgamedir is not set, "hl2" is used.
- -gamestatslogging - Enables game stats logging.
- -gamestatsloggingtofile - Enables game stats logging out to a file, gamestats.log. Passing this parameter automatically forces -gamestatslogging.
- -gl_enablesamplerobjects - (Linux) Use OpenGL Sampler Objects for better texture preloading
- -gl_texclientstorage - (MacOS) Reduce memory usage by relying on GPU memory instead of a host copy
- -gamestatstag <tag> - Tags each map reported with the specified tag.
- -h <height> - Forces the engine to start with resolution set to <height>. Ex: -h 768
- -height <height> - Same as -h
- -heapcheck - (Windows only) Check if the heap isent damaged or empty at the initiation of the game and every frame
- -heapsize <kilobytes> - Specifies the heapsize (in kilobyte) the game will use. This no longer exists on the Source 2009.
- -hideconsole - Forces the console to be hidden, whatever parameters are passed. This overrides -console, -dev, and all others.
- -high - Sets the game's priority to High
- -hijack - Take control of an existing instance of the game, if any, instead of complaining about already running.
- -host - Sets hostname. On Xbox 360, this sets the host computer name to be used for RFS. Xbox name must be <HostPC>_360.
- -hushasserts - Disables a number of asserts in core Source libraries, skipping some error checks and messages.
- -hushsteam - unknown
- -ignoredxsupportcfg - Skips reading DirectX support file, dxsupport.cfg.
- -insecure - Disable Valve Anti Cheat (VAC).
- -internalbuild - Causes the bug reporter panel to be drawn as internal
- -ip - Does the same as the ipname Cvar
- -language %l - Sets the game language to the one specified. (Examples: "english", "german").
- -leakcheck - Dumps statistics about memory leaks.
- -limitvsconst - Limits the number of vertex shaders to a maximum of 256.
- -localcser - Sets a custom gamestats CSER other than the Steam-provided public one (default is steambeta1:27013)
- -low - Sets the game's priority to Low
- -makedevshots - Used for taking screenshots, causing entities to not fade. Enables the use of the devshots_nextmap concommand
- -makereslists - Makes reslists. Need to run with -textmode. Passing a parameter here uses a script file to control more complex makereslists operations (multiple passes, etc.)
- -mat_aaquality - Set MSAA quality level, does the same as the Convar mat_aaquality
- -mat_antialias - Antialiasing. Can be set to 8, amount past 8 won't sharpen the edges of game world.
- -mat_vsync - Enables Vertical Sync
- -mat_softwaretl - Enables software vertex processing.
- -maxdxlevel - Limits the maximum dxlevel to use. Default is 0.
- -maxdownloadfilesizemb - client launch option -maxdownloadfilesizemb N if clients needs to download even larger files from community servers.
- -maxplayers - Set the maximum players allowed to join the server. This does the same as the maxplayers convar, the maximum you can set it to is limited by the game/mod
- -minmemory - Set startup memory to mem_min_heapsize ?*1024 * 1024?
- -monitorTextureSize - Set the size of the texture used to render point_cameras.
- -multirun (only in <Source><Source>) - Allows the game to run even if another Source game is already open.
- Note.png Note: - While only implemented in Source 2013, using this while a non-2013 game is already running will work.
- -navanalyze - related to navmeshes (unknown)
- -navforceanalyze - related to navmeshes (unknown)
- -netspike - Sets the trace threshold to the specified value (the limit of the number of records that will be written to netspike.txt before all records are removed).
- -newdialogs - Forces new Steam dialog to be used.
- -no_compressed_verts - Disables vertex compression for shaders.
- -no_compressed_vvds - Enables thin VVD data, even if the client is not an Xbox 360.
- -noassert - Allows attaching to a debugger instead of directly asserting.
- -noasync - Disables asynchronous filesystem access.
- -noborder - When used with the game set to windowed mode, will make the game act as if in fullscreen mode (no window border).
- -nobots - Allows Counter-Strike server hosts to force bots disabled to enforce CPU limits. (may be tf2 compatible)
- -nobreakpad - unknown
- -noconvert - (xbox360) "No conversions during retail"
- -noclearsave - Skips clearing the save directory after restoring a save.
- -nocrashdialog - Stop some windows crash message boxes from showing up.
- -nodev - Disables -dev and -allowdebug during startup so sv_cheats and developer mode dosent get set.
- -nodns - Disable DNS requests and resolving DNS adresses.
- -nodttest - Skips datatable testing.
- -noff - Disables force feedback for controllers.
- -noforcemaccel - Use the Windows mouse acceleration settings. Only works if -useforcedmparms is set.
- -noforcemspd - Use the Windows mouse speed settings. Only works if -useforcedmparms is set.
- -nogamedll - Do not load the Game DLL, this most likely will cause your game/server to crash
- -nogamestats - related to game stats (unknown)
- -nohltv - Disable SourceTV
- -noip - Do not bind to an ip and disables all multiplayer support
- -nojoy - Disables joystick support.
- -NoLoadPluginsForClient - Disables plugins for client-side
- -nomaster - Hides server from master serverlist.
- -nomessagebox - Stop various windows error message boxes from showing up
- -nominidumps - Dont write minidumps
- -nomouse - Disables in-game mouse support.
- -nop4 - Forces the Engine to bypass Perforce Integration
- -nopreload - Forces models to not be preloaded. Takes priority over cl_forcepreload and -preload.
- -nopreloadmodels - Same as -nopreload
- -nops2b - Disables Pixel Shader 2b support.
- -noqueuedload - Disables queued loading of map resources.
- -NoQueuedPacketThread - (Linux) No queued packet thread will be created.
- -norebuildaudio - Opposite of and overrides -rebuildaudio for the map reslist generator.
- -nodefaultmap - (Linux only[confirm]) Supresses the addition of -map
- -norfs - Forces Remote Filesystem disabled. Xbox 360 only.
- -noshaderapi - Loads a non-existent shader API dll, shaderapiempty.dll. Effectively disables shader and texture loading completely. May be useful with -textmode to load the game quickly since a GUI is not required.
- -nosound - Disables sound support
- -nosrgb - Disables support for SRGB.
- -nostartupsound - Disables menu music (sound/ui/gamestartup*.mp3) to play on startup.
- -nosteamcontroller - Disables Steam controller system
- -nouserclip - Uses software clipping instead of hardware user clip planes
- -NoVConfig - Prevents the filesystem library from running VConfig if it encounters a filesystem error where it cannot find the game content.
- -novid - When loading a game with this parameter, the intro video will not play.
- -olddialogs - Forces old Windows dialogs instead of new Steam ones.
- -override_vpk - Forces actual files to override VPK.
- -particles - Sets the number of beam trails to allow (2048 by default, minimum is 512).
- -phonehome - If debug mode is also enabled, forces the init of phonehome ?which handles some build information and sends them via netmessages to steam?
- -pidfile <pidfile> - Use the specified <pidfile> to store the server pid. Default is srcds.pid[confirm] (Unix/Linux only).
- -pixel_offset_x - Sets the pixel offset to translate on the X axis in MatSystemSurface.
- -pixel_offset_y - Sets the pixel offset to translate on the Y axis in MatSystemSurface.
- -pme - Activate the performance monitoring events code, this again only works on Intel processors newer then PENTIUM4
- -port <variable> - Sets port for a listen server. Default is 27015.
- -preload - Does the same as the sv_forcepreload Cvar. If -nopreload or -nopreloadmodels, this behaviour is disabled
- -primarysound - If surround sound isn't enabled, forces the use of the primary sound buffer
- -profile - If using Xbox360 or enabling this, additional debugging information are logged like the map startup time and similar
- -publicbuild - Is this build a public one? If not, phonehome will not post information of this build to steam
- -random_invariant - Forces the game's random number generator value to be invariant.
- -rebuildaudio - Forces rebuild of _other_rebuild.cache (metacache) file at exit for the map reslist generator.
- -recapvid - RecapVids.txt will be used instead of EndGameVids.txt. This can also be invoked by the command "startupmenu playrecapvid", which bails to the mainmenu and plays the recap video.
- -ref - Sets MATERIAL_INIT_REFERENCE_RASTERIZER on the shader material adapter.
- -remote - Sets the remote file path to be used with -dvddev.
- -replay - Increases maxplayers by 1 at startup and automatically executes replay.cfg for the server.
- -requirecubemaps - If a map dosen't have cubemaps, the game will promt up with "Map X does not have cubemaps!"
- -reflectionTextureSize - Set the size of the texture used to render the Water shader's real-time reflection and refraction.
- -refresh <rate> - Force a specific refresh rate. Ex: -refresh 60
- -refreshrate <rate> - Same as -refresh
- -freq <rate> - Same as -refresh
- -r_emulate_gl - Emulates OpenGL on Windows, provides a framerate boost for most GPUs
- -resizing - Allows resizing the window lower than a specific resolution.
- -reslistdir - Default is "reslists", use this to override. Reslist generator only.
- -reuse - Reuse network sockets
- -rpt - Same as having -condebug, -conclearlog, and -console enabled
- -safe - Enables video safe mode, which sets the game to windowed, the width to 640, the height to 480, refresh rate to default, and disables antialiasing.
- -shader - Loads a specific shader library instead of depending on hardware. Debug only.
- -shaderdll - Loads a different shader dll. Default is shaderapidx9.dll. To do: Is this the same as -shader?
- -shadersondemand - Creates shaders on access, helps reduce D3D memory for tools, but causes I/O hitches.
- -sillygibs - Forces pyroland-esqe gibs
- -small - Allow window sizing smaller then 640x480
- -sndcachedebug - Prints sound cache debug messages (developer must be enabled to see)
- -snoforceformat - Skips sound buffer creation
- -soft - Enables Software hardware rendering mode.
- -softparticlesdefaultoff - Sets particles to be rendered without feathering (scene depth blending) by default.
- -softparticlesdefaulton - Opposite of -softparticlesdefaultoff.
- -spewsentences - Spew out vox sentence names during reslist generation
- -startmap - Restarts devshot generation at the specified map if resuming from a crash.
- -startstage - When running from script file, this starts at specified stage, and sets current work item (default is 0). Reslist generator only.
- -steam - Enables Steam support (if the game is launched from Steam, this is enabled by default). Working directory must be Steam directory. Works only for singleplayer games.
- -steamlocal - Similar to -steam. Runs Steam in local filesystem mode (all content off HDD), as opposed to remote filesystem mode (requiring Steam backend).
- -steamport - Master server updater port. Steam authentication port is this port + 1. (default is 26900)
- -strictportbind - If you launch the game with this option it will quit with an error message if it can't bind to the default or specified port.
- -sv_benchmark - Enables benchmarking through sv_benchmark_force_start.
- -swapcores - Swaps threads for the particle and material systems each init
- -tempcontent - Searches for game content in a folder called "_tempcontent" relative to the absolute game path. This option is enabled by default for Portal 1
- -testscript <filename> - Loads a .vtest file.
- -testshaders - Loads the shader_test library. Debug only.
- -testsub - does nothing
- -textmessagedebug - Spews client text messages to console.
- -textmode - Runs the game without graphics
- -threads - Number of threads to allocate for the thread pool, default is 3
- -tickrate - Sets the game tick interval. Disabled in code for TF2 because "server ops are abusing it".
- -timedemoloop - unknown
- -toconsole - Starts the engine directly in the console, unless a map is specified with +map.
- -tools - Enables engine tools.
- -trackdeletions - Logs what files are marked for deletion in Reslist Generator.
- -tvmasteronly - Only one person allowed in HLTV.
- -usedevshotsfile - Get map list from specified file, default is to build for maps/*.bsp
- -useforcedmparms - Allows the use of -noforcemspd and -noforcemaccel.
- -usegh - Loads ghostinj.dll to allow support for third party dlls (gamehost)
- -uselogdir - Logs various data to logs/(mapname)/*
- -usercon - Enable RCON for Counter-Strike: Global Offensive servers (may work in tf2)
- -usereslistfile - Get map list from specified file, default is to build for maps/*.bsp. Reslist generator only.
- -usetcp - Disable TCP support
- -vcrplayback - Plays back a VCR recording. Nothing is simulated on the server, but all server packets are recorded.
- -vcrrecord - Records a client's game and allows you to play it back and reproduce it exactly. To do: how is this different from a demo?
- -vguifocus - Enables debug VGUI messages related to input focus.
- -vguimessages - Enables debug VGUI messages.
- -vxconsole - Waits for Valve Xbox console to initialise. Xbox 360 only.
- -vproject - Manually sets the VProject directory to load game content for tools.
- -w <width> - Forces the engine to start with resolution set to <width>. Ex: -w 1024
- -width <width> - Same as -w
- -wavonly - Disables DirectSound and makes the engine attempt to play all sounds in PCM format.
- -window - Forces the engine to start in windowed mode
- -sw - Same as -window
- -startwindowed - Same as -window
- -windowed - Same as -window
- -xnet_bypass_security - Disables Xbox 360 secure networking, to allow cross-platform testing.
- -x <x position> - In borderless windowed mode, determines where the window should be horizontally. Ex: -x 0
- -y <y position> - In borderless windowed mode, determines where the window should be vertically. Ex: -y 0
- +connect - Console Command
- +load - Console Command
- +mat_hdr_level - sets the hdr strength
- +maxplayers - Console Command
- +playdemo - Console Command
- +port - Console Command
- +timedemo - Console Command
- +timedemoquit - Console Command
Resolution
Launch Option: -w # -h #
- Description: Replace the hashtag with the number of your desired resolution.
High
Launch Option: -high
- Description: This launch option tells your CPU to run the game in High Priority Mode.
- Warning: Use extreme care when using the high-priority mode, because a high-priority mode application can use nearly all available CPU time.[1]
Mouse Acceleration
Launch Option 1: -noforcemaccel and Launch Option 2: -noforcemspd
- Description: Using both of these will remove all mouse acceleration, it's required if you want a guaranteed raw input, which is the best thing.
Launch Video
Launch Option: -novid
- Description: This removes the Valve launch-video shown when the game is started, which decreases loading times.
DirectX
Launch Option: -dxlevel #
- Description: On Windows, replace the hashtag with either 80, 81, 90, 95 or 100. Note that a high value on lower-end hardware may lower frames-per-second, and vice versa. On Mac or Linux, 90 or 92 should be used. These launch options should be added to first launch, and then removed.
Windowed Mode
Launch Option 1: -windowed or -sw and Launch Option 2: -noborder
- Description: When used together, the game will run in a borderless window. This will increase the game's stability by letting you alt+tab the fastest at the cost of some performance and increased input lag.
List of key names
Hover over a key to see its scripting name. Names are not case-sensitive.
ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 ` 1 2 3 4 5 6 7 8 9 0 - = ← Backspace Tab ⇆ Q W E R T Y U I O P [ ] \ ⇪ Caps A S D F G H J K L ; ' Enter ↵ Shift Z X C V B N M , . / Shift Ctrl ⊞ Alt Spacebar ⊞ Alt ≣ Menu Ctrl |
PrtScn ScrLk Pause Insert Home PgUp Delete End PgDn
← ↓ → |
|
Mouse Button | Name of Keybind |
---|---|
Scroll Up | MWHEELUP |
Scroll Down | MWHEELDOWN |
Left Click | MOUSE1 |
Right Click | MOUSE2 |
Wheel Click | MOUSE3 |
Left Button Click (forward) | MOUSE4 |
Right Button Click (back) | MOUSE5 |
Useful commands
Disguising
The disguise
command takes two arguments, the first being the class and the second being the team.
- Class
- 1. Scout
- 2. Sniper
- 3. Soldier
- 4. Demoman
- 5. Medic
- 6. Heavy
- 7. Pyro
- 8. Spy
- 9. Engineer
- Team
- 1. BLU team
- 2. RED team
- -1. Opposite team
- -2. Same team
Thus, disguise 5 1
would disguise as a BLU Medic and disguise 7 -2
would disguise as a friendly Pyro.
- Note:
disguise 8 -2
(Friendly Spy) will cause the player to un-disguise. - Note: Any collection of characters and/or numbers after the class number that are not 1, 2, -1, or -2 will default the disguise to RED team, regardless of the player's current team. For example,
disguise 1 3
will disguise the Spy as a RED Scout, butdisguise 8 3
will not undisguise a RED Spy.
Buildings
The build
and destroy
commands each take two arguments, the first being the building and the second being the building type. The second argument is only required if it is not 0
, and is currently only used to differentiate between teleporter entrances and exits.
The build
command will pull up the blueprint to place a building, with an exception of the Sapper, which is wielded.
build 0 0
will build a Dispenser (Engineer only)build 1 0
will build a teleporter entrance (Engineer only)build 1 1
will build a teleporter exit (Engineer only)build 2 0
will build a Sentry Gun (Engineer only)build 3 0
will build a Sapper (Spy only)
Similarly, the destroy
command will destroy buildings.
destroy 0 0
will destroy a Dispenser (Engineer only)destroy 1 0
will destroy a teleporter entrance (Engineer only)destroy 1 1
will destroy a teleporter exit (Engineer only)destroy 2 0
will destroy a Sentry Gun (Engineer only)- Note: Sappers cannot be destroyed.
It is possible to use the old build
commands, which used only one argument.
build 0
will build a Dispenser (Engineer only)build 1
will build a teleporter entrance (Engineer only)build 2
will build a Sentry Gun (Engineer only)build 3
will build a teleporter exit (Engineer only)build 3
will build a Sapper (Spy only) [deprecated]
Voice Menu
The voicemenu
command takes two arguments, the menu number and the command number.
voicemenu 0
- 0: MEDIC!
- 1: Thanks!
- 2: Go! Go! Go!
- 3: Move Up!
- 4: Go Left
- 5: Go Right
- 6: Yes
- 7: No
- 8: Pass To Me!
voicemenu 1
- 0: Incoming
- 1: Spy!
- 2: Sentry Ahead!
- 3: Teleporter Here
- 4: Dispenser Here
- 5: Sentry Here
- 6: Activate Charge!
- 7: MEDIC: ÜberCharge Ready
- 8: Pass To Me!
voicemenu 2
- 0: Help!
- 1: Battle Cry
- 2: Cheers
- 3: Jeers
- 4: Positive
- 5: Negative
- 6: Nice Shot
- 7: Good Job
- Note: If you wish to display the voicemenu, rather than fire the
voicemenu <num> <num>
message, the command isvoice_menu_<num>
: where <num> is a number between 1 and 3, and takes no arguments. For instance, to display the first voicemenu, one would run the commandvoice_menu_1
.
Eureka Teleport
The eureka_teleport
can teleport an Engineer holding the Eureka Effect to their spawn or teleporter exit.
eureka_teleport 0
will teleport the player to their spawneureka_teleport 1
will teleport the player to their teleporter exit
The player will see "Unknown command" in their console even though the command works.
Assorted
clear
will clear the console of any information.alias
will list all currently defined aliases.fov_desired (20-90)
will set the field of view.viewmodel_fov
will set the FOV for weapon models. It ranges by default from 54 to 70.r_drawviewmodel (0/1)
will show (1) or hide (0) weapon models.lastdisguise
will cause the player to re-disguise as their last disguise. (Spy only)load_itempreset (0-3)
will load a particular loadout preset [A, B, C, D].say message
will send a message to public chat.say_team message
will send a message to team chat.say_party message
will send a message to party chat.+taunt
will open the player's taunt loadout.+use_action_slot_item
will cause the player to use their action slot item.volume (0-1)
will change the in-game volume.taunt_by_name (name)
will run a specified taunt, given the exact name of a taunt in the player's current taunt loadout, without opening the taunt menu.
Advanced Scripting Techniques
Toggles
It is possible to bind a key to toggle a command which would otherwise be a press and hold command.
bind w toggle_movement alias toggle_movement enable_movement alias enable_movement "alias toggle_movement disable_movement;+forward" alias disable_movement "alias toggle_movement enable_movement;-forward"
This script will cause a press of W to keep the player moving forward until W is pressed again.
Key combinations
It is possible to create a script where pressing one button while another is held down will change the action of the first button.
bind e call alias call Call_For_Medic alias Call_For_Medic "voicemenu 0 0" alias Call_For_Ubercharge "voicemenu 1 6"
At this point, the script will mean that every time E is pressed, the player will call for a Medic. It also has an unused alias to call for an Ubercharge.
bind shift +toggleState alias +toggleState "alias call Call_For_Ubercharge" alias -toggleState "alias call Call_For_Medic"
Now, pressing ⇧ Shift will redirect call
to ask for an ubercharge. Releasing ⇧ Shift will make call
point back at a Medic call.
When ⇧ Shift+E is pressed, the player will call for an Ubercharge, rather than for a Medic.
If you want multiple key combination binds connected to the same toggle key you will have to repeat the first step listed before.
bind f thank alias thank Thank_Player alias Thank_Player "voicemenu 0 1" alias Good_Work "voicemenu 2 7"
After this add the same command as what happened in the second step, but alongside the already used command.
bind shift +toggleState alias +toggleState "alias call Call_For_Ubercharge;alias thank Thank_Player" alias -toggleState "alias call Call_For_Medic;alias thank Good_Work"
Overall the script should look like:
bind e call alias call Call_For_Medic alias Call_For_Medic "voicemenu 0 0" alias Call_For_Ubercharge "voicemenu 1 6" bind f thank alias thank Thank_Player alias Thank_Player "voicemenu 0 1" alias Good_Work "voicemenu 2 7" bind shift +toggleState alias +toggleState "alias call Call_For_Ubercharge;alias thank Thank_Player" alias -toggleState "alias call Call_For_Medic;alias thank Good_Work"
Wait-testing
Since the wait
command is integral to some scripts, it may be necessary to test to see if a server has disabled the command.
alias waitTester "alias waitTest waitPositive;wait;waitTest" alias wait "alias waitTest waitNegative" alias waitPositive "echo Wait is enabled on this server.;exec waitPositive.cfg" alias waitNegative "echo Wait is DISABLED on this server!;exec waitNegative.cfg" waitTester
This script relies on the fact that if the wait command is disabled on a server, the alias named wait
can be defined by the user. Thus, the script creates an alias named waitTest
which by default points to waitPositive
, but if wait
is not allowed (and can thus be defined by the user), will be redirected to waitNegative
.
Loops
- Warning: Loops which run without a wait command will cause the TF2 client to hang. It is highly suggested to run a looping script only after a wait testing script.
It is generally considered bad form to have one alias point to itself, as although the loop can be broken out of, it cannot be reset. Therefore, looping scripts tend to include two parts to the loop: The part that waits, and the part that loops.
bind g loopKey alias loopKey startLoop alias startLoop "alias loopKey stopLoop;+attack;alias redirect loop;loop" alias stopLoop "-attack;alias redirect;alias loopKey startLoop" alias loop "+left;wait 33;-left;+right;wait 33;-right;redirect"
This script will start looping once G is pressed. It begins by firing, and then switches the player's view back and forth every 33 frames (half of a second on most servers). Pressing G would cause the next iteration of the loop to stop, also stopping the firing.
Sequences
alias +pyrocombo "slot1;+attack;wait 32;slot2" alias -pyrocombo "-attack;slot1"
This script will create two aliases, one to start a sequence, and one to end it. The sequence will switch to a Pyro's Degreaser and fire for 32 ticks, before switching to the Panic Attack and shooting until the button is no longer held. Sequences can also be made like this:
alias quickscope "slot1;+attack2;wait 32;+attack;wait 16;-attack;-attack2"
This script will create a sequence alias, that once activated will cause the Sniper to quick-scope his Sniper Rifle; by executing the long string of commands called a sequence. Sequences are useful in making scripts, and learning how to make one will help in the long run of scripting.
Cycles
A cycle is toggle script where there are a minimum of 3 possible options, which loop (ex, 1, 2, 3, 1). Example:
alias Fov_Cycle Fov1 alias Fov1 "alias Fov_Cycle Fov2;fov_desired 70" alias Fov2 "alias Fov_Cycle Fov3;fov_desired 80" alias Fov3 "alias Fov_Cycle Fov1;fov_desired 90" bind o Fov_Cycle
This script makes it so pressing the O key, FOV values switch between 70, 80, and 90.
Selection addons
A selection script is built onto a cycle to make it more intuitive. Selection scripts allow cycling upwards and downwards, ultimately giving more control for selecting which command(s) to run.
alias CondC_UP Cond1 alias CondC_DOWN Cond5 alias ApplyCond ApplyCond33 alias ApplyCond33 "addcond 33" alias ApplyCond49 "addcond 49" alias ApplyCond72 "addcond 72" alias ApplyCond74 "addcond 74" alias ApplyCond90 "addcond 90" alias Cond1 "alias CondC_UP Cond2;alias CondC_DOWN Cond5;alias ApplyCond ApplyCond33" alias Cond2 "alias CondC_UP Cond3;alias CondC_DOWN Cond1;alias ApplyCond ApplyCond49" alias Cond3 "alias CondC_UP Cond4;alias CondC_DOWN Cond2;alias ApplyCond ApplyCond72" alias Cond4 "alias CondC_UP Cond5;alias CondC_DOWN Cond3;alias ApplyCond ApplyCond74" alias Cond5 "alias CondC_UP Cond1;alias CondC_DOWN Cond4;alias ApplyCond ApplyCond90"
This gives more control in what conditions to add to the player. This also allows for better freedom of selection and ease of use, as it makes scrolling through options in the cycle possible.
Randomization
Randomization is a strange and niche feature. Randomization is rarely used, as most processes aren't as useful when randomized. However, randomization can be useful for chat binds, such as for trade advertising or annoying other players on the server.
Note: Due to the nature of TF2's scripting, this section will be considerably long. If you don't already have an understanding of how cycles work, the information presented may not be relevant.
alias call f1 alias cycle c2 alias c1 "alias cycle c2;alias call f1" alias c2 "alias cycle c3;alias call f2" alias c3 "alias cycle c4;alias call f3" alias c4 "alias cycle c5;alias call f4" alias c5 "alias cycle c1;alias call f5" alias f1 "say 1" alias f2 "say 2" alias f3 "say 3" alias f4 "say 4" alias f5 "say 5" alias +w "+forward;cycle" alias -w "-forward;cycle" alias +a "+moveleft;cycle" alias -a "-moveleft;cycle" alias +s "+back;cycle" alias -s "-back;cycle" alias +d "+moveright;cycle" alias -d "-moveright;cycle" bind o call bind w +w bind a +a bind s +s bind d +d
This script is assigning and resigning multiple alias values. When any of the WASD keys are pressed, the cycle command is ran, which moves the cycle command to the next value in the cycle and sets the "call" command to a value corresponding to the cycle number. This is based on the player's movement, and only changes values if the player is moving. It is possible to make this randomizer more effective by using other various techniques stated here (ex. Loops), but this example is for demonstration purposes only.
Timed action
Timed or held actions trigger when a button is pressed down for a certain amount of time. Timed actions can be used in situations where a script or command shouldn't be instantly ran the moment a button is pressed (ex. fat-fingering a disconnect bind)
alias "+ti_zoom" "alias zoom_con zoomOn; wait 132; zoom_con" alias "-ti_zoom" "zoomOff; alias zoom_con ; rb_tizoom-M4" alias "rb_tizoom-M4" "unbind mouse4; wait 132; bind mouse4 +ti_zoom" alias "zoomOn" "fov_desired 20; r_drawviewmodel 0" alias "zoomOff" "fov_desired 90; r_drawviewmodel 1" bind "mouse4" "+ti_zoom"
Pressing (and immediately releasing) Mouse 4 with this script loaded will have no noticeable effect, however holding down Mouse 4 for 2 seconds will cause the script to lower the FOV to 20, and hide viewmodels. Letting go of Mouse 4 at any point will undo these changes by setting the FOV to 90 and unhiding viewmodels.
This works because of the use of + and - aliases. Pressing whatever key +ti_zoom
is bound to will redefine zoom_con
to activate the script, and if left pressed for the wait
duration will execute the script. But, if the button is released zoom_con
is redefined to do nothing. The key is then "disabled" by being unbound for the same wait
duration, and rebound afterwards to restore use of the key.
Note: Rebinding of the key is technically redundant, as the script will not execute the timed action if the button is unpressed. However, if the button is pressed multiple times it is possible to execute the timed action if the confirmation alias (in this case, zoom_con
is properly defined as any of the presses would execute it. Unbinding the key for the same duraiton of the original wait
delay ensures that the effect can't be triggered if the button is rapidly used
Commenting
As scripts get longer, the need for well-named aliases grows. However, it is not always sufficient to explain what an alias does simply by its name. Adding a pair of forward slashes (//) will turn the rest of the line into a comment–it will not execute any actions on the text.
voicemenu 1 6 //Activate Charge!
Since it is not obviously clear what the voice command is, a comment can explain it.
Noteworthy scripts
There are several notable scripts that have affected gameplay. Some of these are patched out, while others remain functional.
Patched scripts
Pistol scripts
Originally, the Pistol could be fired almost as fast as the human hand could press a key. Scripts were created to simulate this rapid pressing by holding down a single key.
August 13, 2009 Patch: The Pistol now fires at a fixed rate, not based on the speed of pressing the fire button.
Chargin' Targe turn scripts
Originally, the keyboard commands to turn left and right were not treated the same as the mouse commands. The Chargin' Targe was the first weapon to create a restriction on how quickly a player could turn, therefore Valve put a limit on mouse turn-speed, yet forgot to apply the same restriction to the keyboard command that resulted in the same action. Scripts were created to rebind the turning controls when a player charged, circumventing this restriction.
June 23, 2011 Patch: Fixed an exploit with the Chargin' Targe that allowed greater turning control than intended.
Air crouching scripts
Originally, players could crouch as many times as they liked in a single jump. By binding a script to crouch and uncrouch as rapidly as possible, the engine could be exploited to make it difficult to properly register shots on jumping targets.
March 6, 2009 Patch: Players can now only duck twice in the air.
Idling Scripts
Most servers seek to prevent players idling for drops. Players can try to outsmart these systems with scripts that simulate basic movement.
An Active Solution to an Idle Threat requires players to accept a pop-up notification in order to continue to get drops.
Current Scripts
Weapon Viewmodel Hiding Scripts
There are a large number of scripts which toggle the weapon viewmodel depending on which weapon slot is selected for a class. Players often make their viewmodels invisible to clear up the screen, but make items like melee weapons, PDAs, watches, and so forth visible because these models indicate important information. For example, the Spy relies heavily on his viewmodel to determine when he is cloaked, when his Cloak is disturbed, and when the Dead Ringer activates. Other classes use the melee animations to judge when their attacks will hit.
Weapon Zoom Scripts
By changing your FOV, this script creates the visual effect of zooming in with whatever weapon the user is holding. It can usually be toggled between a zoomed and normal (unzoomed) version.
Sentry Jumping Scripts
Since the Engineer Update, Engineers have been able to pack up and carry their Sentry Guns. Simultaneously introduced in the update, the Wrangler allows Engineers to Sentry jump with their Sentry rockets. With extremely fast inputs, it was discovered that a player could Sentry jump and successfully pack up their Sentry before they were launched away.
While a human can repeat this feat, it is difficult. Some players made scripts which could reliably execute the commands in the right order at the right speed allowing them to make a Sentry jump while carrying their Sentry every time.
- Note: The Rescue Ranger can circumvent this necessity, as it can pick up buildings at range for 100 metal.
Gunslinger Scripts
Since it can be troublesome to destroy then rebuild a Combat Mini-Sentry in the heat of battle through the PDA, some players have scripted the destruction and rebuilding of their Combat Mini-Sentry with the click of one or two buttons. Such a script is especially useful when using the Frontier Justice, as the player gains practically instant access to revenge crits when needed.
Sensitivity and Control scripts
Some players prefer different mouse sensitivities and control schemes for some classes. For example, changing from the Medic, which doesn't require fine aiming, to the Sniper, which encourages high precision headshots, a player may wish to change their mouse sensitivity. These scripts alter control schemes and mouse settings on a per class, or even per weapon, basis.
Charge Dash Scripts
Since timing a charge and jump can be difficult, some players may use a quick script that binds the two actions to a button so that the charge dash will cover the maximum amount of distance possible. The player is still required to swing their melee weapon normally to end the charge though.
Quickscope Scripts
Many players find it difficult to scope in and fire straight after to get a quick headshot. There are scripts that will zoom in and fire just by clicking one button. This does require players to aim outside of the scope, though.
Rocket Jump Scripts
In order to Rocket Jump to a maximum height or distance, it is required that the player jumps, crouches, and fires their rocket at roughly the same time. This can be easily scripted to occur with the press of a button.
Auto-Disguise Scripts
For Spies who find manually disguising to be a hassle, this script automatically disguises as a chosen class after the player attacks with any weapon. Auto-disguise can usually be toggled and customized to choose a disguise to use.
ÜberCharge Broadcasting Scripts
With this script, activating ÜberCharge as Medic will also write a custom message in team chat to alert your teammates about your activation, in order to encourage your team to push ahead with you. A similar script, upon activation, plays the "ÜberCharge Ready" voice command while writing in team chat that you faked your Über to fool the enemy team.
Medic Radar
This script only works for Medic, as it lets you press a button to temporarily set the autocall percentage to a very high number. This makes it so that you can see the locations of nearby teammates. Script:
alias "autocall_default" "hud_medicautocallersthreshold 75.730003/Custom Threshold"
alias "autocall_all" "hud_medicautocallersthreshold 150"
alias "+radar" "autocall_all"
alias "-radar" "autocall_default"
bind [KEY] "+radar
Kill-Bind Scripts
In certain circumstances, such as when cornered by a Medic wielding the Ubersaw, it can be beneficial for a class to be able to kill themselves quickly (in this case, to deny the Medic Über) with a key bind (for example, bind k kill
). Although mostly only relevant in competitive play, there are occasional uses in public servers, sometimes for comedic effect instead of to benefit gameplay.
Null-Cancelling Movement Scripts
In stock TF2, pressing two opposing movement keys at once (such as "A" (+moveleft) and "D" (+moveright)) will cancel all movement and render the player immobile, which can be a fatal mistake during battle. This script makes it so that the direction of the last key pressed will be used instead. For example, pressing "A" will make the player go left, and pressing "D" while still holding "A" will make the player go right instead of stopping.
Chat Bind Scripts
Chat bind scripts are designed to post a pre-written message in the in-game text chat. Typically, users will bind these scripts to a key on their keyboard for easy repitition. These scripts can vary from user-to-user, and can say anything within the text limit, depending on what a player would want to say. Some common binds are used for team co-ordination, such as a bind to tell a team that their Medic has popped an ÜberCharge. Other common binds are used for banter, such as messages upon kills and/or dominations. Another variation on this is a trade offer bind, where it sends information to the chat about a possible trade offer. This type of script can also be automated to send these offers every couple of minutes.
Notes
- Each config file is limited to one mebibyte (1.04858 megabytes) of information, though this restriction can be circumvented by exec-ing another config file at the end of the first.
See also
- List of useful console commands
- List of TF2 console commands and variables on the Valve Developer Community